Technical Support
Characteristics:
Half the weight of glass.
High resistance to various weather conditions "not affected by sunlight or humidity"
Withstands a high degree of heat, from 30°c to 160°c.
Cleaning:
It should be cleaned with mild soap liquid using tap water, and should be dried with a soft piece of cloth.
Any spot of grease or oil can be removed via kerosene.
The remaining hexane of these cleaning materials should also be removed by water immediately.
Glass cleaning sprays should not be used with acrylic sheets.
Acetone, gasoline materials, petrol, carbon tri-chloride, and any type of varnish should not be used.
Laminating:
The laminated layer covering the sheets should be retained on the sheets as long as possible.
In case of any work necessities, the lamination on the sheets could be removed by the finalization of work.
Working with Acrylic Sheets:
We Should
Retain the laminating material as long as possible.
Use a sharp chainsaw to cut acrylic sheets.
Use water or oil to cool the sheets after cutting, especially those sheets with 1/8 or 3/16 thickness, the sheets should also be soaked in water before cleaning.
We Should NOT
Use toothed chainsaws because they will cause slopes during the cutting process, and thus will change the final shape of the sheet.
